Tile Installation Cost in Orlando, FL (2026 Guide)
Tile installation in Orlando typically costs about $5 to $45 per square foot including materials and labor, based on national 2026 data. Standard ceramic or porcelain in a simple layout sits at the lower end; natural stone, mosaics and complex patterns sit at the top.
Quick summary
- All-in range: $5 to $45 per sq ft (HomeAdvisor, June 2026); $9 to $28 per sq ft for typical projects (Modernize, August 12, 2026).
- Labor only: $3 to $15 per sq ft (HomeAdvisor) or $5 to $15 (Modernize).
- Removing old tile: $2 to $7 per sq ft (HomeAdvisor).
- Average tile project: $2,111 (HomeAdvisor).
Tile installation cost per square foot
Tile installation costs about $5 to $45 per square foot installed, according to HomeAdvisor's 2026 cost guide, and most typical projects land between $9 and $28 per square foot, according to Modernize. The two sources use different samples, so this guide shows both instead of averaging them.
The per-square-foot price usually includes the tile, thinset mortar, grout, basic underlayment and labor. Removing the old floor, repairing the base and waterproofing wet areas are often priced as separate lines, so check each estimate for them.
Cost by tile type
Material choice changes the installed price more than anything else. Ceramic is the most affordable, porcelain costs a bit more and handles water better, and natural stone costs the most to buy and to install.
| Tile type | Material (per sq ft) | Labor (per sq ft) | Installed (per sq ft) |
|---|---|---|---|
| Ceramic | $1–$5 | $5–$8 | $6–$13 |
| Porcelain | $3–$10 | $5–$8 | $8–$18 |
| Natural stone (granite, travertine, marble, slate) | $3–$30 | $7–$15 | $8–$38+ |
| Glass mosaic / artisan | $10–$50 | $10–$20 | $15–$58 |
Cost by room size
Room size sets the total, but small rooms cost more per square foot because installers have minimum charges. Modernize lists typical minimum charges of $200 to $400.
| Room size | Ceramic | Porcelain | Natural stone |
|---|---|---|---|
| 50 sq ft (small bathroom) | $300–$650 | $400–$900 | $400–$1,900 |
| 100 sq ft | $600–$1,300 | $800–$1,800 | $800–$3,800 |
| 150 sq ft (average bathroom) | $900–$1,950 | $1,200–$2,700 | $1,200–$5,700 |
| 200 sq ft | $1,200–$2,600 | $1,600–$3,600 | $1,600–$7,600 |
| 400 sq ft (kitchen or living room) | $2,400–$5,200 | $3,200–$7,200 | $3,200–$15,200 |
By project type, HomeAdvisor's 2026 averages are $300 to $1,300 for a bathroom floor, $800 to $3,000 for a kitchen floor, $480 to $1,500 for a backsplash, and $1,800 to $5,000 for a shower.
Labor cost and extra charges
Labor for tile is usually $3 to $15 per square foot, or $60 to $120 per hour, according to HomeAdvisor. Modernize puts labor at $5 to $15 per square foot. The extra lines below often appear separately on an estimate.
| Extra item | Typical cost | Source |
|---|---|---|
| Old tile removal and disposal | $2–$7 per sq ft | HomeAdvisor |
| Old tile removal and disposal | $2–$5 per sq ft | Modernize |
| Base leveling or repair | $1–$3 per sq ft | Modernize |
| Waterproofing membrane (wet areas) | $1–$3 per sq ft | Modernize |
| Backer board | $1–$2 per sq ft | Modernize |
| Grout and sealing | $1–$2 per sq ft | Modernize |
| Herringbone or diagonal pattern | +$1–$3 per sq ft | Modernize |
| Extra tile for cuts and waste | 10% (15% for diagonal) | Modernize; HomeAdvisor says 10–15% |
What changes the price of a tile job
Five factors explain most of the difference between two tile estimates for the same room.
- Tile type and size. Large-format tiles need a flatter base and more careful setting. Small mosaics need more cuts and more grout.
- Pattern. A straight grid is the cheapest. Herringbone and diagonal layouts add cuts and labor.
- Base condition. Most Orlando homes sit on a concrete slab. Cracks, low spots and old adhesive add prep time.
- Removal. Taking out old tile costs more than pulling carpet, because tile has to be broken up and hauled away.
- Wet areas. Showers and bathroom floors need waterproofing and have more detail work around fixtures.
Florida adds one more point: for floors that could see water, ask for tile set in cement-based mortar, which FEMA rates as flood damage-resistant. Tile laid with organic adhesive is not (see our tile installation in Orlando page).
How to compare tile estimates
Two estimates are only comparable when they include the same work. Ask every installer for an itemized written price.
- Scope: square footage, rooms, and whether removal and disposal are included.
- Base prep: what they will do to the slab, and whether it is in the price or charged later.
- Materials: who buys the tile, and which mortar, grout and membrane will be used.
- Layout: the pattern, the offset (33% or less for long tiles, per ANSI A108.02) and the grout joint width.
- Schedule and warranty: start date, working days, and warranty terms in writing.
Still choosing a material? Compare flooring services room by room, or browse all flooring cost guides.
Tile cost questions
How much does it cost to install tile per square foot in Florida?
Tile installation in Florida typically costs about $5 to $45 per square foot including materials and labor, based on HomeAdvisor's 2026 national data. Typical ceramic and porcelain projects fall around $6 to $18 per square foot installed, according to Modernize. Removal of old floors and waterproofing are usually extra.
How much does it cost for 1,000 square feet of tile?
At HomeAdvisor's 2026 range of $5 to $45 per square foot, 1,000 square feet of tile costs about $5,000 to $45,000 installed. Using Modernize's porcelain range of $8 to $18 per square foot, it would be about $8,000 to $18,000. Removal and slab prep can add several thousand dollars.
What is the average labor cost to install floor tile?
Labor to install floor tile averages about $3 to $15 per square foot, or $60 to $120 per hour, according to HomeAdvisor's 2026 guide. Modernize lists $5 to $8 per square foot for standard ceramic or porcelain and $7 to $15 for natural stone.
What is a good price per square foot for tile?
A good price depends on the tile and the work included. For standard porcelain, Modernize's 2026 range is $8 to $18 per square foot installed. A quote far below that may leave out removal, base prep or waterproofing, so compare itemized estimates line by line.
How much should I pay to have tile installed in a bathroom?
A bathroom floor typically costs $300 to $1,300, according to HomeAdvisor's 2026 data, and a 150-square-foot bathroom runs about $1,200 to $2,700 in porcelain, according to Modernize. A tiled shower is a separate project, at about $1,800 to $5,000.
Why do small tile jobs cost more per square foot?
Installers have fixed costs for travel, setup and cleanup, so many set a minimum charge. Modernize lists typical minimums of $200 to $400. On a small backsplash or powder room, that minimum can make the price per square foot much higher than for a large floor.
Get your exact tile price
Ranges are a starting point. For a written price on your room, send the size and a short note, and an independent local installer will review it. It is free and there is no obligation.
Want to know what happens next? Read how the free estimate works.