Hardwood Floor Installation Cost in Orlando, FL
Hardwood installation in Orlando typically costs $6 to $25 per square foot installed, based on national 2026 data. Engineered hardwood usually costs less than solid and handles Florida humidity better.
Hardwood cost by type
Hardwood costs about $6 to $25 per square foot installed, according to Modernize (August 12, 2026). Engineered hardwood is usually the lower-cost and more slab-friendly option.
| Type | Material (per sq ft) | Labor (per sq ft) |
|---|---|---|
| Solid hardwood | $4–$15 | $3–$8 |
| Engineered hardwood | $3–$12 |
Herringbone patterns, glue-down methods or subfloor repairs raise the total above these ranges.
Hardwood cost by room size (calculated)
The table multiplies Modernize's $6 to $25 per square foot installed range by common room sizes. These are calculations, not quotes.
| Room size | Installed cost |
|---|---|
| 150 sq ft (bedroom) | $900–$3,750 |
| 300 sq ft | $1,800–$7,500 |
| 500 sq ft (living/dining) | $3,000–$12,500 |
| 1,000 sq ft | $6,000–$25,000 |
What else can add to a hardwood quote
- AcclimationWood sits in the home for a few days before installation, which some installers price into the job.
- Subfloor prep and moisture barriersEspecially over a concrete slab.
- On-site sanding and finishingCommon for solid hardwood, adding labor that pre-finished engineered planks skip.
- PatternHerringbone or other patterned layouts add cuts and labor.
See hardwood installation in Orlando for how solid and engineered wood compare, or the LVP and laminate cost guides for lower-cost wood looks.
Hardwood cost questions
How much does hardwood floor installation cost per square foot?
Hardwood installation costs about $6 to $25 per square foot installed, according to Modernize (August 12, 2026). Engineered hardwood material runs $3 to $12 per square foot and solid hardwood $4 to $15; labor is about $3 to $8 per square foot.
Is engineered hardwood cheaper than solid hardwood?
Usually, yes. Engineered hardwood material costs about $3 to $12 per square foot, compared to $4 to $15 for solid hardwood, according to Modernize. Labor is similar for both at $3 to $8 per square foot for a standard install.
How much does it cost to install hardwood in a 300 sq ft room?
Using Modernize's $6 to $25 per square foot installed range, a 300 square foot room costs roughly $1,800 to $7,500. That is a calculation from the per-square-foot range, and the material grade (solid versus engineered, species) drives most of the spread.
How much does it cost to install hardwood in a 500 sq ft room?
At $6 to $25 per square foot, a 500 square foot room (a living and dining area) costs about $3,000 to $12,500 installed. Herringbone patterns or glue-down methods raise the total.
What makes hardwood installation more expensive than other floors?
Material cost is the biggest factor: solid and engineered hardwood cost more per square foot than laminate or most LVP. Acclimation time, subfloor prep, and on-site sanding and finishing for solid hardwood also add labor that floating floors do not need.
Get your exact hardwood price
Send the room size, and an independent local installer gives you a written price. No obligation.