LVP Flooring Installation Cost in Orlando, FL
LVP installation in Orlando typically costs $6 to $16 per square foot installed, according to national 2026 data. Click-lock LVP installs faster than tile, which keeps labor lower.
LVP installation cost per square foot
LVP costs about $6 to $16 per square foot installed, according to Modernize (August 12, 2026): $4 to $10 per square foot for materials and $2 to $6 for labor. Floating click-lock installation keeps labor lower than glued-down or mortar-set floors.
| Vinyl type | Material (per sq ft) | Labor (per sq ft) | Installed (per sq ft) |
|---|---|---|---|
| Luxury vinyl plank (LVP) | $4–$10 | $2–$6 | $6–$16 |
LVP cost by room size (calculated)
The table below multiplies Modernize's $6 to $16 per square foot range by common room sizes. These are calculations, not quotes, and do not include removal of old flooring or slab prep.
| Room size | Installed cost |
|---|---|
| 150 sq ft (bedroom or bathroom) | $900–$2,400 |
| 250 sq ft | $1,500–$4,000 |
| 400 sq ft (kitchen or living room) | $2,400–$6,400 |
| 1,000 sq ft | $6,000–$16,000 |
What else can add to an LVP quote
- Old floor removalCarpet comes out easily; old tile or hardwood removal costs more.
- Slab moisture testing and prepRequired before LVP goes down on a concrete slab.
- UnderlaymentA thin foam or cork layer for cushioning and sound, if not pre-attached to the planks.
- Trim and transitionsBaseboards and thresholds at doorways.
See LVP installation in Orlando for how the job is done, or compare to tile and laminate cost guides.
LVP cost questions
How much does LVP flooring cost per square foot installed?
LVP installation costs about $6 to $16 per square foot installed, according to Modernize (August 12, 2026): $4 to $10 for materials and $2 to $6 for labor.
How much does it cost to install LVP in a 150 sq ft room?
Using Modernize's $6 to $16 per square foot range, a 150 square foot room (about the size of an average bathroom or bedroom) costs roughly $900 to $2,400 installed. That is a calculation from the per-square-foot range, not a quote.
How much does it cost to install LVP in a 400 sq ft room?
At $6 to $16 per square foot, a 400 square foot room (a kitchen or living room) costs about $2,400 to $6,400 installed. Slab moisture testing, old floor removal and trim are often priced separately.
Is LVP cheaper than tile?
Usually similar or slightly less. LVP runs $6 to $16 per square foot installed, while ceramic tile runs $6 to $13 and porcelain $8 to $18, according to Modernize. LVP installs faster since it floats rather than being set in mortar, which can lower labor cost for a given room.
Why is LVP labor cheaper than tile labor?
Click-lock LVP floats over the slab without adhesive or grout, so it installs faster than tile, which has to be set in thinset mortar and grouted. Modernize lists LVP labor at $2 to $6 per square foot, versus $5 to $8 for tile.
Get your exact LVP price
Send the room size, and an independent local installer gives you a written price. No obligation.