Epoxy floor coating in Orlando
What to discuss before choosing epoxy.
Read Epoxy floor coating in Orlando
Epoxy Floor Coating Cost in Orlando, FL
Written by Daniel Reyes, flooring journalist at Orlando Flooring Contractors. Updated . Estimated reading time: 6 minutes.
National guides put professional epoxy flooring at about $3 to $12 per square foot, and HomeAdvisor lists a typical garage project at $1,650 to $3,494. Your Orlando price depends on the measured area, the slab’s condition and the coating system named in the quote.
Get a free epoxy floor estimateNational guides put professional epoxy flooring at about $3 to $12 per square foot, and HomeAdvisor lists a typical garage project at $1,650 to $3,494. Your Orlando price depends on the measured area, the slab’s condition and the coating system named in the quote.
Want a number for your rooms? Use the flooring cost calculator to turn these ranges into a planning budget.
| Cost item | National reference | Source |
|---|---|---|
| Typical garage project | $1,650–$3,494 (average $2,526) | HomeAdvisor, updated June 2026 |
| Professional, per sq ft | $3–$12 installed | This Old House, updated March 2026 |
| DIY materials, per sq ft | $2–$5 | This Old House |
| Labor only, per sq ft | $1–$7 (33%–60% of the total) | HomeAdvisor |
| Crack and chip patching | $25–$250 | HomeAdvisor |
| Metallic epoxy | $5–$12 per sq ft | This Old House |
Cost by garage size
Area drives the total more than anything else, but the two national guides we checked use different garage sizes, so compare square feet, not labels.
| Garage | HomeAdvisor: size and professional range | This Old House: size and DIY range |
|---|---|---|
| One-car | About 250 sq ft: $750–$3,000 | About 240 sq ft: $480–$1,200 |
| Two-car | About 500 sq ft: $1,500–$6,000 | About 360 sq ft: $720–$1,800 |
| Three-car | About 750 sq ft: $2,250–$9,000 | About 560 sq ft: $1,120–$2,800 |
A “two-car garage” can mean 360 or 500 square feet depending on the source, which alone moves a budget by more than a third. Ask the installer to measure and write the number on the estimate.
Cost by coating system
“Epoxy” covers several products. Both guides list three base resins whose price per gallon rises with durability, plus decorative and protective layers on top.
| System or layer | National reference | What to know |
|---|---|---|
| Water-based epoxy | $30–$50 per gallon | Lowest cost and lowest durability; HomeAdvisor says it is typically replaced every three to five years |
| Solvent-based epoxy | $40–$55 per gallon (HomeAdvisor) | Mid-grade; releases fumes during application |
| Solid (100% solids) epoxy | $45–$150 per gallon | Most durable; both guides recommend a professional |
| Decorative flakes (chip) | About $10 per 1-lb bag; HomeAdvisor puts it near $0.04 per sq ft | Material is cheap; the extra cost is mostly labor and the clear coat over it |
| Metallic finish | $5–$12 per sq ft | A decorative system, priced as its own scope |
| Polyurea or polyaspartic topcoat | About $150 per gallon | This Old House notes UV resistance; high-grade coatings can add 20%–30% to the total |
Flake and chip floors are popular searches in Orlando. The flakes themselves add little material cost; what changes the price is the extra broadcast and clear-coat steps. Ask whether the clear coat over the flakes is included.
Repairs and surface preparation
Preparation is what makes the coating bond, and it is where quotes differ most. HomeAdvisor lists patching of cracks and chips at $25 to $250 and acid washing, etching or power washing at $50 to $100 when it is priced separately.
Larger problems change the budget completely. HomeAdvisor lists concrete resurfacing at $1,000 to $5,000 and notes that cracks caused by structural movement can point to foundation repair of $2,150 to $7,730 or more. An epoxy coat over a moving crack will not hold.
This Old House quotes an epoxy specialist who says the concrete should be at least 60 days old and unsealed for the coating to adhere. Ask whether your slab was ever sealed or painted, and how the installer will test it.
Florida factors: humidity, slab moisture and sun
Central Florida conditions affect the system, not just the schedule. This Old House warns that epoxy may not cure correctly and can peel if humidity is too high when it is applied, and its specialist suggests applying it between 50 and 80 degrees Fahrenheit.
Most Orlando homes sit on a concrete slab, and a garage slab can carry moisture from below. Ask how the installer checks moisture before coating and what product or primer they use if the reading is high.
Sun is the other factor. This Old House notes that epoxy can yellow with sunlight and humidity over time and that a UV-resistant topcoat prevents it, at extra cost. For a garage that stays open in the afternoon or a covered patio, ask whether the topcoat is UV-stable.
Example budget for a two-car garage
The figures below are a worked example built only from the national ranges above, not a quote. They show how the lines add up so you can read an estimate.
| Line | Low | High |
|---|---|---|
| Coating installed, 400 sq ft at $3–$12 per sq ft | $1,200 | $4,800 |
| Crack and chip patching | $25 | $250 |
| Etching or washing, if priced separately | $50 | $100 |
| Illustrative total before any upgrade | $1,275 | $5,150 |
A high-grade or UV-resistant topcoat can add 20% to 30%, according to both guides. Resurfacing or structural repair would be separate. Your real number comes from an installer who has seen the slab.
DIY kit or professional?
DIY kits cost about $2 to $5 per square foot in materials, according to This Old House, but the owner does the cleaning, repairs, acid wash and application, and the guide recommends a professional for solid epoxy and decorative systems.
The trade-off is mostly about preparation and the system you can apply. A professional quote should include profiling the concrete, the base coat, any flakes and the topcoat; compare that full system with what a kit covers before deciding.
For what a written estimate should list, see the flooring estimate checklist and our epoxy floor coating page.
Glossary
- Solid epoxy
- Also called 100% solids epoxy; a thick, durable resin with little solvent, usually applied by professionals.
- Flake (chip) floor
- Colored vinyl or mica flakes broadcast into the wet base coat and sealed under a clear topcoat.
- Polyaspartic
- A fast-curing topcoat in the polyurea family, noted for UV resistance.
- Etching
- Opening the concrete surface, by acid or mechanical means, so the coating can bond.
- Resurfacing
- A new thin cement layer over damaged concrete, priced separately from the coating.
Sources
Reviewed October 2026. Third-party figures and claims are attributed to the source.
- HomeAdvisor, How Much Does Epoxy Flooring Cost in 2026? (updated June 2026) — garage project range and average, garage sizes, labor, prep, repairs, resin cost per gallon, resurfacing.
- This Old House, How Much Does Epoxy Flooring Cost? (updated March 2026) — per-square-foot DIY and professional ranges, flakes, metallic, topcoats, humidity, UV and the 60-day concrete rule.
Questions and answers
How much does an epoxy garage floor cost in Orlando?
National guides put a typical garage project at $1,650 to $3,494 (HomeAdvisor) and professional installation at about $3 to $12 per square foot (This Old House). Your price depends on measured area, slab condition and the system named in the quote.
How much does an epoxy flake floor cost?
The flakes add little material cost; HomeAdvisor puts them near $0.04 per square foot. The difference is the extra labor and the clear topcoat, so ask whether the clear coat is included.
Is epoxy cheaper than tile for a garage?
Usually per square foot, but compare the full scope: preparation, repairs and the topcoat. A quote that omits preparation is not comparable.
Does Florida humidity affect epoxy?
It can. This Old House warns that epoxy may not cure correctly and can peel if humidity is too high during application. Ask how the installer checks conditions and slab moisture.
Is the free estimate request here a quote?
No. It is free and carries no obligation. An independent installer confirms availability, assesses the slab and gives the written price.
Get a free estimate for your project
Describe your rooms, approximate area and existing floor. The request is free with no obligation to hire; an independent installer confirms availability, assessed scope and written price separately.
About this guide
Written by Daniel Reyes, flooring journalist at Orlando Flooring Contractors. Estimated reading time: 6 minutes.
Request a free estimate for your project
Describe your room, floor choice and approximate project size. An independent installer can confirm scope, availability and pricing.
This guide is planning information. An independent installer must evaluate the property and confirm scope and price.